DMG-LUMIERE – Lotus Cine Group

Accessories from DMG Lumière

Drivers

MINI DRIVER

This small power box is a DCDC converter, indispensable to control the MINI Switch light. It controls both the intensity (0 to 100%) and the colour temperature (3000 to 5600°k) with a smooth dimmer. It can take any DC charge from 12 to 35V and will convert it into 24V DC.
It mounts on the back of the MINI Switch with a brilliant new quick-lock system.
Running of battery power: both V-lock and Anton Bauer battery plates can mount onto the MINI Controls to make the power unit into one block, as well as mount on the back of the light to spread the weight evenly.
Running of AC power: a MINI Power Supply Unit is included in the basic light KIT, which can also mount on the MINI Controls OR the back of the light.

SL1-MINI MIX CT

SL1 & MINI MIX Driver-12 to 35VDC

WDMX DRIVER

SL1 DRIVER

Basic DC Driver for SL1 SWITCH. Mounts directly onto the back of the light panel with spring
loaded system. Chogori input connector and over moulded 8-pin output connector.

MAXI SWITCH DRIVER

Accessories from DMG Lumière

Power Boxes

MINI AC POWER SUPPLY

External AC/DC power supply which plugs into the MINI Switch Controls.
It can mount on both the back of the MINI Switch Light and the MINI Switch Controls with a quick-lock system.

MAXI AC POWER SUPPLY

The MAXI Switch power box is a perfect combination of design and control. It separates into 2 units, the Driver and Power Supply Unit (PS). The Drive also can be mounted on the back of the lamp head for maximum comfort of control.
This power box embarks all the latest wireless technology:
WIFI, so it can be controlled directly from your smartphone or tablet.
DMX and WDMX, using Lumen Radio’s emit/receive Timo Chip.
It runs at 24VDC so can also be powered by a battery source with a load of minimum 20Amps

BATTERY MOUNT (FOR MINI AND SL1), VL OR AB

Mounting plate which welcomes V or gold mounted batteries. Chogori output connector.
Fits directly onto the back of the Light with spring loaded system or can be carried using
the shoulder strap.

SL1 AC POWER SUPPLY

External and universal power supply and its mounting plate – mounts on the back of the
light. Standard AC power plug and Chogori output connector.

MAXI MIX POWER SUPPLY UNIT

External power supply in its shell – mounts on the back of the light with Velcro straps. An additionnal fastening plate allows completely secured mounting with screws. Handle and
standard 3/8-16 thread for independant hanging.
Neutrik PowerCon True 1 in and through AC power plug allows for AC daisy chain.

DOUBLE V-LOCK BATTERY ADAPTOR

Standard V mount dock for two batteries (maximum 17.5 VDC) providing a 26 VDC nominal output.

Accessories from DMG Lumière

Cables

MINI SWITCH EXTENSION CABLE 2 M (6.5 ‘)

Links the driver to the MINI SWITCH Light. 4 Pin proprietary connector. Max distance 16 m (48’) without power loss.

SL1 SWITCH EXTENSION CABLE 8 M (26 ‘)

Links the SL1 driver to the SL1 SWITCH Light. 8 Pin proprietary connector. Max distance 16 m (48’) without power loss.

MAXI SWITCH 10 M (32 ’) CABLE HL TO CT

Links the driver to the MINI SWITCH Light. 4 Pin proprietary connector. Max distance 16 m (48’) without power loss.

MINI SWITCH EXTENSION CABLE 8 M (26 ‘)

Links the driver to the MINI SWITCH Light. 4 Pin proprietary connector. Max distance 16 m (48’) without power loss.

MAXI SWITCH 2 M (6.5 ’) CABLE CT TO PSU

Links the MAXI SWITCH driver and PSU Chogori connectors.

MAXI SWITCH DRIVER TO PSU CABLE 10 M (32 ‘)

Links the MAXI driver and PSU Chogori connectors.

MIX EXTENSION CABLE 2M (6.5′)

Links the driver to the MINI or SL1 MIX Light. 4 Pin proprietary connector. Max distance 16m (48’) without power loss.

MIX EXTENSION CABLE 8 M (26 ‘)

Standard V mount dock for two batteries (maximum 17.5 VDC) providing a 26 VDC nominal output.

MAXI MIX DC CABLE

XLR 3 pin 2m DC cable going from the MAXI power supply unit (PSU) to the MAXI Headlamp.

MAXI MIX AC CABLE

AC cable with PowerCon True 1 female connector.
Used to power the MAXI MIX Power Supply Unit (PSU).

MAXI MIX 0.5 M (19 “) DC CABLE

XLR 3 pin 0.5m DC cable going from the MAXI power supply unit (PSU) to the MAXI Headlamp.

Accessories from DMG Lumière

Mounts

QUICK-FIT HANDLE

The Handle Mount is made of 100 % aluminium and quick-locks onto the light or the DMX power Box with a spring loaded locking system.
Ideal for any moving situation, or places where a stand doesn’t fit.
Quickfit handle, it will turn any moving situation easy! Provides a very comfortable hold, a must have in any of our kits.

GOOSE-NECK MOUNT

Goose neck 16mm Female Receiver with 360° single ball action – ideal for c-stand mounting.
Made of steel, it will secure any weight between 1 & 15kg 51lb – 33lb)
Available for: MINI, SL1 & MAXI Switch (Universal mounting plate)

LOLLYPOP MOUNT

Standard 10mm Lolly Pop male mount with 360° single ball action – universal mounting plate.
Maximum Weight Load 20 kg
Standard Mount for MINI SWITCH / SL1 SWITCH & MAXI SWITCH

MAXI SWITCH YOKE

MAXI SWITCH Yoke. Allows full 360° rotation. Locks two panels into any folded position from flat open, open to closed.

HYBRID MOUNT FOR MINI / SL1 & MAXI

Hybrid version of the lollypop mount, compatible with 28mm and 16mm standard receivers and spigots.

MAXI MIX SINGLE YOKE

Yoke for MAXI MIX light, hybrid 16mm and 28mm detachable spigot.

MAXI MIX DOUBLE YOKE

Yoke for two assembled MAXI MIX lights with 28mm spigot. The yoke includes two LINK2 accessories for the assembly and allows full 360° rotation.

MAXI MIX LINK 2 & 4

Rigging accessories that mount on the back corners of the light with strong ¼ turn fasteners, allowing two (LINK 2) or four (LINK 4) lampheads to join together. An arch with a hole for M10 accessories allows standard mounting options to be used while fastening to tubes and structures.
The LINK 2 is to be used on the sides of joined lampheads. Side threads allow for mounting on the double yoke accessory.
The LINK 4 is to be used between four lampheads.

ADAPTOR PLATE

Adaptor plate for hanging SL1/MINI MIX Controller with the power supplies or battery plate

POLE OPERATED YOKE FOR MINI SWITCH AND MIX

Pole Operated Yoke for MINI MIX and SWITCH fixtures, with 28mm baby pin spigot.

YOKE FOR MINI SWITCH AND MIX

Yoke for MINI MIX and SWITCH lights, hybrid 16mm and 28mm detachable spigot.

POLE OPERATED YOKE FOR SL1 SWITCH AND MIX

Pole Operated Yoke for SL1 MIX and SWITCH fixtures, with 28mm baby pin spigot.

YOKE FOR SL1 SWITCH AND MIX

Yoke for SL1 MIX and SWITCH lights, hybrid 16mm and 28mm detachable spigot.

POLE OPERATED YOKE FOR MAXI MIX

Pole Operated Yoke for MINI MIX and SWITCH fixtures, with 28mm baby pin spigot.

POLE OPERATED YOKE FOR 2 MAXI MIX FIXTURES

Pole Operated Yoke for 2 MAXI MIX fixtures, with 28mm baby pin spigot.

MAXI MIX TRIPLE YOKE

Yoke for three assembled MAXI MIX lights with 28mm spigot, which enables full 360° rotation. The Triple Yoke includes four LINK2 accessories for assembly and two short AC cables for daisy-chaining power.

Accessories from DMG Lumière

Bags

MINI RIGID BAG

The bag for the MINI SWITCH/MIX can welcome one fully accessorised kit (except The Dome which comes in its own bag). Hard fabric bag with wheels and extendable handle.

SL1 RIGID BAG

Rigid Bag with Wheels and Shoulder Strap. The Rigid Bag can contain one fully accessorised SL1 Switch/MIX Kit (DMX or DC/DC) including DoP Choice items and The Dome. Soft partitioning walls inside the bag to add extra protection.

MAXI SLIP COVER

MAXI Slip Cover. Fits the MAXI Light with Yoke and a shoulder strap.
Power Options, cables and accessories can fit in the MINI Rigid Bag.

MAXI SWITCH RIGID BAG

MAXI Rigid Bag can contain one fully accessorised kit. Perfect travel companion, with foam infills and wheels for easy transportation.

MAXI MIX RIGID CASE

Rigid case for one maxi MIX fully accessories, with wheels.

Accessories from DMG Lumière

Accessories

SL1 DOME

Available for both SL1 and MINI SWITCH & MIX, and for the MAXI MIX, the “Dome” is our most popular diffusion accessory.
It slides onto the light replacing the standard flat diffuser. Its round shape makes it the perfect light-softener with a larger spread of 160°.
Moreover, it gives out a really nice slick line of light and creates great reflections. It is particularly appreciated in car/beauty commercials.

SL1 / MINI QUICK-FIT BARNDOORS

Barn doors are light modifiers to shape and direct light. Quick fit function with 2 spring loaded screws which fit directly on to the side of the light.
Lightweight and robust; can be re-tightened manually.
Available for: MINI & SL1 SWITCH/MIX

MINI MIX DOME

MAXI MIX LINK 2

MAXI MIX LINK 4

MAXI MIX DOME

BARNDOORS FOR MAXI MIX

Barndoors especially designed for the MAXI MIX that easily shapes and directs light.
Strong fixing system with 4x quarter turn claw that attach to dedicated holes at the back of the fixture.

DOT ROUND DIFFUSER ACCESSORY

The DOT Round Diffuser is a half globe that magnetically snaps onto the front of Rosco’s DMG DASH LED fixture. This accessory transforms the light from the rectangular DMG DASH into a glowing circle of light – making it perfect for creating eye light, adding a dash of color into a tabletop shot, or for use as an on-screen practical. Made of flexible silicone, the DOT collapses flat for storage and transport. Each DOT ships with a fabric bag.

DMG DASH™ QUAD KIT SNAPBAG®

A softbox, designed by DoPchoice, for the DMG DASH Quad Kit that easily mounts onto the lights when linked in the quad configuration using elastic straps. The SnapBag is manufactured using a neutral, black fabric with a reflective interior and a MAGIC CLOTH® diffuser panel.

DMG DASH™ BARNDOORS ACCESSORY

Four-leaf barndoors that quickly attach to the front of a single DMG DASH via magnets to shape and direct the fixture’s light output. The barndoors accessory also features elastic straps for additional security.

Accessories from DMG Lumière

DOP Choice

SL1 SNAPGRID

This award winning item is just a beauty. Your dreams have come true, you can now fit an egg crate onto a light in just a snap!
The SnapGrid was specifically designed by DoP Choice to fit both the SL1 Switch and the Mini Switch. It straps around the light with velcro in less than 30 seconds. It is made of high-quality fabric and its patent protected framing system makes this accessory very easy to fold into nothing for minimum space usage.
It will cut and direct the already-soft-light of both the SL1 Switch and the Mini Switch at 30/50° angle, in a way you have not seen before.

SL1 SNAPGRID FOR SNAPBAG

Fits around the SnapBag with velcro, directs the soft light at 40/60° angle (horizontal/
vertical).
All DOP Choice items are made of black neutral fabric. Reflective inside and high quality
diffusion cloth.

SL1 SNAPBAG

he SnapBag is a soft light box specifically designed by DoP Choice to fit both the SL1 Switch and the Mini Switch.
It comes with 4 steel rods which lodge directly onto the light, onto which the softbox tenses itself.
The SnapBag increases the light surface to 135x40cm (53×16”) for the SL1 Switch and to 80x40cm (31×16″) for the MINI Switch.
It also comes with 3 fabric diffusions (quarter, half and full).

MINI SNAPBAG

Light bank which mounts directly onto the light into the designated holes – comes with a
full, a half and a quarter fabric diffuser.
All DOP Choice items are made of black neutral fabric. Reflective inside and high quality
diffusion cloth.

MINI SNAPGRID FOR SNAPBAG

MINI SNAPGRID

Directs the softlight at 30/50° angle (horizontal/vertical) Mounts rapidly onto the light
with a clever velcro system.
All DOP Choice items are made of black neutral fabric. Reflective inside and high quality
diffusion cloth.

DOUBLE MAXI MIX AND MAXI SWITCH DOME

The Dome for DOUBLE MAXI MIX et MAXI SWITCH.

MAXI SWITCH SNAPBAG

Light bank for MAXI SWITCH which mounts directly onto the light into the designated holes – comes with a full, a half and a quarter fabric diffuser.

MAXI SWITCH SNAPGRID FOR SNAPBAG

Fits around the MAXI SWITCH SnapBag with velcro, directs the soft light at 40/60° angle (horizontal/vertical).

RABBIT EARS FOR ONE MINI

MAXI SNAPGRID

Dop Choice 30°/50° Snapgrid for MAXI MIX and MAXI SWITCH SPLIT.

RABBIT EARS FOR TWO MINI

he RABBIT-EARS® soft box fastening system replaces the heavy and cumbersome speed ring standard for mounting DoPchoice’s SNAPBAG® soft boxes. RABBIT-EARS® allow soft boxes to be mounted firmly in under three minutes.
MFR : 29811205A223 / DOP-RE-2 (RABBIT EARS For 2 MINI SWITCH or MIX)
If you already own a RABBIT-EARS generic mounting system from DoP Choice, you can simply purchase the adapters to use a DMG MINI led light.

MINI SNAPBAG OCTA 3

Octagonal RABBIT-EARS SNAPBAG® with 3′ diameter. Due to highly reflective fabrics you will get maximum light output. Even without a baffle they deliver even illumination across the front.
OCTA 3 can be used with either RABBIT-EARS 1 or RABBIT EARS 2.

SNAPBAG OCTA 5 – DOP CHOICE

Octagonal RABBIT-EARS SNAPBAG® with 5′ diameter. Due to highly reflective fabrics you will get maximum light output. . Even without a baffle they deliver even illumination across the front.
OCTA 5 can be used with either RABBIT-EARS 1 or RABBIT EARS 2.

Recent Posts

Recent Comments

Archives

Categories